 |
Nuclear
Capabilities
(197kb)
|
PROJECT MANAGEMENT AND FEASIBILITY
STUDIES
- Procurement of $10 million worth of equipment covered by
30 separate contracts for such items as: liquid zone control compressors, main vacuum
pumps, flexible bellows, flexible hoses, control valves, butterfly valves and air handling
equipment (Bruce "B")
- Management of full scale test rig (Maple-X10 Reactor,
AECL-CRL)
- Overall project implementation plan, cost estimate and
schedule (MNR - Maple Project, McMaster University)
- Nuclear engineering consultant on the feasibility study of
mechanical systems (Kaon Factory)
- Feasibility study for plutonium fuel processing facility
(AECL-SP)
- Fuel transportation study for reprocessing of fuel in
Europe (AECL-SP)
- Fusion waste management study (Fusion Fuels Technology
Project)
- Feasibility of design and constructability of tritium
breeder blanket modules (Fusion Fuels Technology Project)
- NRU Rehabiliation Assessment Plan
SAFETY RELIABILITY AND LICENSING
- CSA Z299.1 Certificate with QA Program successfully audited by OPG
- Pilot Environmental Qualification studies for High
Pressure Emergency Coolant Injection system (Bruce "A" NGS) and for Shutdown
System 1 (Pickering "A" NGS)
- Safety and reliability analysis for Shutdown Systems 1 and
2 as well as for ECC and Containment systems (Gentilly-2)
- Safety and reliability analysis for Shutdown Systems 1 and
2 as well as for ECC and Containment systems (Point Lepreau NGS)
- Monitoring of site operations and safety system testing
and assistance in submission of quarterly reports to the Atomic Energy Control Board
(Point Lepreau NGS)
- Reliability, maintainability and safety analysis training
course (Wolsong 1)
- Safety and reliability analysis, Probabilistic Safety
Analysis (Wolsong 2,3,4)
- Reliability and safety analysis of Safety System 1, Safety
System 2 and Reactor Regulating System (Maple-X10 Reactor, AECL-CRL)
REMOTELY OPERATED EQUIPMENT
- Development of low torque single channel tooling for
reactor maintenance (Darlington "A" NGS)
- Design and development of special purpose tooling for
large scale fuel channel replacement (Bruce "A" NGS)
- Design and development of special purpose tooling for
multi channel replacement (Bruce "A" NGS)
- Design and development of wire brush cleaning tools for
Pickering "A" retube project
- Design of special purpose tooling for reactor maintenance
(CANDU-3, AECL)
- Spent fuel packaging project for NPD decommissioning
(AECL)
RADIATION MONITORING, INSTRUMENTATION AND SAFETY
SYSTEM DESIGN
- Gamma and Radon survey of site of proposed housing
development project in Elliot Lake, Ontario
- Leak testing service for radioactive sealed sources
- Design and supply of Sample Flow and Control Panels for
the Stack Radiation Monitoring System (Darlington NGS)
- Design, procurement and commissioning of containment
isolation radiation monitoring system (Bruce "A" NGS)
- Design and development of on-line liquid effluent
radiation monitor (Bruce "A" NGS)
- Design, procurement and commissioning of containment
isolation radiation monitoring system (Bruce "B" NGS)
- Design of button up containment system monitors (Pickering
"B" NGS)
- Design of delayed neutron system for location of failed
fuel (CANDU-600)
- Design of containment button-up system monitors
(CANDU-600)
- Design enhancement of hydraulic and neutron measurement
loops for delayed neutron system for location of failed fuel (Point Lepreau NGS)
- Design review, design modification and testing of
Iodine-125 rig (MNR Pool Reactor, McMaster University)
- Design of area, stack and contamination radiation
monitoring systems (Kanata Radioisotope Processing Facility, Nordion International Inc.)
- Design and development of laser spectrometer for
measurement of small concentrations of heavy water in light water (Ontario Hydro
International)
- Design and development of prototype on-line in-reactor
temperature probe (Ontario Hydro Technologies)
MODELLING AND DATA ANALYSIS
- Acoustic signal analysis and processing (Darlington
"A" NGS)
- Modelling of fluid/structure acoustics and dynamics
(Darlington "A" NGS)
- Development of test program for measurement of pressure
and vibration data on Unit 3 (Darlington "A" NGS)
- Development of a database for statistical analysis of fuel
damage (Darlington "A" NGS and Bruce "B" NGS)
- Seismic qualification of structures (Pickering
"A" NGS)
- Stress analysis of fuelling machines (Pickering
"A" NGS)
- Stress analysis of spent fuel racks (Pickering
"A" NGS)
- Seismic qualification of structure (Tritium Technology
Facility, AECL-CRL)
- Preliminary building seismic qualification (MNR - Maple
Project, McMaster University)
- Thermal hydraulic design, stress and heat transfer
analysis for breeder in tube concepts for ITER (Fusion Fuels Technology Project)
- In vessel conceptual design for pilot reactor, including
stress and heat transfer analysis, and cost estimates (Fusion Fuels Technology Project)
- Evaluation of compact toroidal gun for space usage (Fusion
Fuels Technology Project)
|
|
